氣動燙金模切機

您當前位置:主頁 > 產品展示 > 氣動燙金模切機 >

QTM-458-40T 氣動燙金模切機

時間:2016-04-23 16:02

QTM-458-40T氣動燙金模切機性能特點:

◆ 采用德國技術設計的多層加力主驅動係統,節奏高效。

◆ 模塊化設計的機體,可根據需要選擇單一模切功能,節省費用。

◆ 燙金模切範圍廣泛,可模切各種基材與不同類型產品。

◆ 可調校燙印停留時間及湯因壓力,以達到各種燙印、模切效果、燙印浮雕及重壓力壓痕效果特佳。

◆ 配備安全保護裝置,安全可靠。

◆ 電氣係統按CE標準設計,最新人機界麵,全數字控製,操作簡單,並可進行升級。

◆ 可隨意設置送箔長度與跳步步數,燙金箔利用率高。

QTM-458-20T pneumatic Die Cutting Machine:

◆ It adopts German technology of multi boosting driving system,with high efficiency and energy saving.

◆ Modular design of the machine body, selective mode of single die cutting according to different requirement, with lower cost.

◆ It can be widely used for hot stamping and die cutting on various materials and products.

◆ It can adjust the hot stamping delay time and pressure,to get different results on the products, especially for embossing and creasing effect.

◆ Equipped with safety protection device for operation safety.

◆ CE standard design of electrical system, latest HMI,digital control, easy operation and upgrading.

◆ Capable setting of foil running length and skip steps, full use of stamping foil, two groups of foils feeding of high efficiency.

可選配項目:

1.人機界麵電氣控製係統

2.腳踏開關與安全光柵電氣控製係統

3.普通電氣控製係統

4.雙接觸按鈕開關控製係統

5.燙金,模切綜合係統

6.單一模切功能係統

Optional functions:

1.HMI electrical control system

2.Foot pedal and safety light curtain system

3.Ordinary electrical control system

4.Double pressing button control system

5.Hot stamping and die cutting integrated system

6.Single die cutting mode system

技術參數 /Technical parameter

燙印麵積
bronzing area
600mm×460mm 燙印壓力
bronzing pressure
1-40T
工作台麵積
worktable area
900mm×800 mm 功率
power
5000w
最大工作高度
max working height
160mm 氣源壓力
air supply pressure
0.8-1.2mpa
工作台行程 
stroke of the worktable
600mm 溫度調節
temperature control
1-300℃
上一篇:QTM-458-10T 氣動燙金模切機 下一篇:這是最後一篇

Copyright © 煙台草莓视频ios下载印刷機械有限公司 版權所有 魯ICP備12016054號-1>草莓视频ios下载地圖: XML HTML

手機:15966504088  15098487185  電話:0535-6739355  地址:煙台市芝罘區通林路8號